Reed® 100% Cotton Flame Resistant FR Navy Coverall is cut so you can get the job done comfortably and is available in longs for sizes 38-58. Generously proportioned and constructed, it features one chest pocket with pencil stall and flap, tool pocket, side vent openings, a two-way brass zipper and a gripper snap at the top of the neck.
- ATPV=11 / CAT2 / 2112
- 9 ounce twill
- One chest pocket with pencil stall and flap
- Tool pocket
- Sewn throughout with Nomex® thread
- Heavy duty two-way Nomex® and brass zipper
- Bar tacks at points of stress
- One-piece, top-stitched collar
- Deep pleated bi-swing back for comfort
- Safety stitched inseams and outseams
- Two patch hip pockets with flaps
- Two set-in front pockets
- Hemmed sleeve cuffs
- Snaps at top and at neck
- Side vent openings
- Inseams 31" or Long 33"
* These Items Ship From Mississippi
See Estimated Shipping Transit Times
These FR garments are either 100% cotton or 88/12 fabrics treated with gaseous ammonia to impart flame resistant properties. The FR characteristics are permanent, and are for the life of the garment.
Applications include the petrochemical, chemical, oil, and gas industries. They are also appropriate for electrical utilities, welding, flame cutting, and areas involving ferrous metals.
REED® FR Cotton garments should NOT be used around molten white metals such as aluminum, magnesium, or zinc, as these substances will stick to FR cotton. REED® FR Cotton garments should also NOT be worn in areas where static control is a factor, or where contact with strong oxidizers, such as sodium hypochlorite is likely.
REED® FR Cotton garments can be laundered using the normal procedures for 100% cotton. DO NOT USE CHLORINE BLEACH. Repeated use will destroy the flame retardant polymer. Starches and fabric softeners should be avoided as these additives may mask the flame retardant properties.