MicroLuxxTM Mats are a revolutionary approach to floor protection. They are expertly developed using a cutting-edge blend of standard nylon strands and finer denier fibers. Because of this creative combination, these mats function far better than regular choices because they can absorb a lot more moisture. Improve the usefulness and efficiency of your surroundings with MicroLuxxTM Mats, which redefine the standards for moisture absorption and durability.
- Superior Moisture & Dust Control - Unique "microfiber" blend absorbs and retains 2.5 times more moisture and dust than standard carpeted mats
- Resilient - High-twist, heat-set nylon resists crushing to better trap dirt and extend the useful life of the mat
- Fade Resistant - Solution-dyed nylon is resistant to fading and impervious to bleach
- Safe - Certified high-traction by the National Floor Safety Institute (NFSI)
- Commercially launderable
- Entrance Floor Mat
- Available in 6 colors on durable nitrile rubber with three backing options (smooth, cleated, or suction) to ensure the mat stays in place on your floor
- Recommended for indoor use at commercial entryways, in lobbies or any interior location where additional traction or moisture control is needed.
SURFACE
- Material: 900 denier/128 filament 3-ply solution-dyed type 6 nylon
- Construction: Cut pile
- Weight: 33 ounces/yard2
- Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard2)
BACKING
Material: Nitrile rubber -universal cleated
Thickness Options:
- Standard 52-mil (body thickness 52-mil; border thickness 94-mil)
- (Special Order) Medium duty 65-mil (body thickness 65-mil; border thickness 107-mil)
- (Special Order) Heavy duty 90-mil (body thickness 90-mil; border thickness 90-mil)
STANDARDS & TESTING
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes flammability standard DOC FF1-70
CLEANING
MicroLuxx™ Wiper Floor Mats can be cleaned in several different ways.
They can be commercially laundered :
MicroLuxx™ Commercial Wiper Mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue. For heavy soil, increase temperature to max 140 degrees F (60 degrees C). Break should not exceed pH of 9.5; use low pH non-ionic detergents.
- Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
- Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
- Break 2-3 minutes, high water level, 120 degrees F (49 degrees C)
- Rinse 2 minutes, high water level, cold
- Rinse 2 minutes, high water level, cold
- Extract (low speed) 1-2 minutes
- Shake out (rotate wheel at wash speed with drain open) 1 minute
- Extract (low speed) 3-5 minutes
- Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
- Cool down 5 minutes
- Lay mats flat following removal from washer or dryer. Allow to cool before rolling.
Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C). If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.
- Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications),
- Cleaned with an extractor and laid flat to dry.
- Mats should always be dry before they are placed back in service, and cooled before rolling.
These Items Ship from Georgia
See Estimated Shipping Transit Times
