A cleaner and safer environment is certain with our PlushTM Entrance Floor Mats, which were developed with a thick, plush carpet pile specifically designed to excel in moisture absorption compared to regular mats. These mats are the best option for high-traffic areas where cleanliness is of the utmost importance because of their outstanding effectiveness in capturing moisture and debris. With our PlushTM mats, you can elevate your entryway and add visual appeal to your area while also making it seem more friendly.
- Superior Moisture & Dust Control - Heavier carpet pile absorbs and retains 50% more moisture and dust than standard mats
- Resilient - High-twist, heat-set nylon resists crushing to better trap dirt and extend the useful life of the mat
- Fade Resistant - Solution-dyed nylon won't fade in sunlight or with repeated washing; impervious to bleach
- Safe - Certified high-traction by the National Floor Safety Institute (NFSI)
- Commercially launderable
- Available in 8 color options on durable 90-mil nitrile rubber with multiple backing options (smooth, cleated, or suction) to ensure the mat stays in place on your floor
- Recommended for indoor use at commercial entryways, in lobbies or any interior location where additional traction or moisture control is needed.
SURFACE
- Material: Solution-dyed type 6 nylon
- Construction: Cut pile
- Weight: 36 ounces/yard2
- Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard2)
BACKING
- Material: Nitrile rubber smooth, backing (Special Order: universal cleated, full cleat, or suction)
- Thickness: Heavy duty 90-mil (body thickness 90-mil; border thickness 90-mil)
OVERALL MAT THICKNESS: 3/8 inch (0.375")
STANDARDS & TESTING
- Certified high-traction by the National Floor Safety Institute (NFSI)
CLEANING
Plush mats can be cleaned in several different ways.
Plush mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue. For heavy soil, increase temperature to max 140 degrees F (60 degrees C). Break should not exceed pH of 9.5; use low pH non-ionic detergents.
- Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
- Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
- Break 2-3 minutes, high water level, 120 degrees F (49 degrees C)
- Rinse 2 minutes, high water level, cold
- Rinse 2 minutes, high water level, cold
- Extract (low speed) 1-2 minutes
- Shake out (rotate wheel at wash speed with drain open) 1 minute
- Extract (low speed) 3-5 minutes
- Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
- Cool down 5 minutes
- Lay mats flat following removal from washer or dryer. Allow to cool before rolling.
Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C).
If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.
- Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
- Cleaned with an extractor and laid flat to dry.
Mats should always be dry before they are placed back in service, and cooled before rolling.
These Items Ship from Georgia
See Estimated Shipping Transit Times
